How deep will my tube-well need to be?

It depends on the location. In many parts of Bangladesh, safe drinking-water aquifers now sit between 600 ft and 1,000 ft — our survey tells you exactly.

Do I get a written yield test?

Yes. We hand over a full yield and drawdown test report with every well.

It can be in shallow aquifers. Deep drilling avoids most arsenic zones, and we can add an arsenic removal plant if raw water tests positive.

Groundwater Source DoE / ECR-2023 Compliant Reply in 1 business day

Sinking Deep Tube-Well

Secure your own water source — drilled right the first time, with lifetime service backup.

Licensed rig operators with 15+ years of Bangladesh strata experience
Correct casing schedule and gravel packing — no premature collapse
Written yield & drawdown test report before handover
Matched submersible pump, cable, panel and starter installed

Call an Engineer WhatsApp Now Trusted by 500+ industries in Bangladesh

500+

Plants delivered

15+ yrs

In water & wastewater

100%

DoE compliance record

24 hrs

Engineer response

Sinking Deep Tube-Well installed and running at a client site

Real project photo — Groundwater Source

Overview

A tube-well drilled the wrong way is an expensive hole in the ground. We drill deep tube-wells from 200 ft to 1,200 ft using DTH and rotary rigs, with correct casing, gravel packing, yield-drawdown testing and matched submersible pump — for factories, housing societies, farms and bottling plants. Full documentation, guaranteed yield, warranty on workmanship.

Key Benefits

Licensed rig operators with 15+ years of Bangladesh strata experience
Correct casing schedule and gravel packing — no premature collapse
Written yield & drawdown test report before handover
Matched submersible pump, cable, panel and starter installed
Full workmanship warranty and lifetime service backup

Typical Applications

FactoriesHousing societiesAgricultureHospitalsBottling plants

How We Deliver

Step 1
Hydro-geological study
Aquifer depth, yield estimation and neighbour-well analysis — so you drill where the water actually is.
Step 2
Drilling & development
DTH or rotary rig matched to your strata; proper development for maximum sustainable yield.
Step 3
Pump installation
Correctly sized pump, cable, control panel and starter — no burnt motors from mismatched loads.
Step 4
Documented handover
Full yield-drawdown test report, drilling log and service contract — you own the data.

Introduction

A deep tube-well is the backbone of a reliable water supply for factories, housing societies, farms and bottling plants. But a badly drilled well is an expensive hole in the ground — our drilling crews, rigs and workmanship are built around getting it right the first time.

How we drill your tube-well

Every project follows the same disciplined sequence:

Hydro-geological survey — including nearby well data — to estimate depth and yield.
DTH or rotary drilling from 200 ft to 1,200 ft, matched to your strata.
Correct casing schedule and gravel packing for long life and clean water.
Yield and drawdown test to confirm sustainable output.
Matched submersible pump, cable, panel and starter installation.

Where deep tube-wells are used

Manufacturing plants, textile and pharma factories, RMG units, bottling lines, hospitals, housing societies and large agricultural farms.

Frequently Asked Questions

How deep will my tube-well need to be?: It depends on the location. In many parts of Bangladesh, safe drinking-water aquifers now sit between 600 ft and 1,000 ft — our survey tells you exactly.
Do I get a written yield test?: Yes. We hand over a full yield and drawdown test report with every well.
Is arsenic an issue?: It can be in shallow aquifers. Deep drilling avoids most arsenic zones, and we can add an arsenic removal plant if raw water tests positive.

Call WhatsApp